Aqua­deck provides optimum protec­tion against acci­dental falls into the water and is avai­lable in 3 models:

• Aqua­deck EC: a fast, auto­no­mous auto­matic cover with a solar-​powered battery
• Aqua­deck EC: a moto­rised auto­matic cover with a power supply unit located in the plant room. An ideal solu­tion for new pools
• Aqua­deck EM: a reliable, econo­mical cover with rigid slats that can be rolled up manually using a retrac­table handw­heel.

And your summer lasts longer.

The BWT Pearl Protect above-​ground cover, with its contem­po­rary design, custo­mi­sable features and LED ligh­ting, will blend in perfectly with your pool and its surroun­dings.

By keeping your pool clean and redu­cing filtra­tion times, the BWT Pearl Protect cover reduces your energy and chemical consum­ption.

It reduces your ecolo­gical foot­print and offers you an envi­ron­men­tally friendly solu­tion.

Protect your beau­tiful pool!

The BWT Evodeck cover, like all covers in the BWT range, provides optimum protec­tion against acci­den­tally falling into the water.

The BWT Evodeck cover complies with stan­dard NF P90-​308, so you can enjoy your pool with complete peace of mind.

BWT Aqua­matic protects and secures your pool at the best possible price. Made in France, this cover is reliable, solid and high-​performance.

BWT Aqua­matic is perfectly suited to all confi­gu­ra­tions, whether above or below ground. Advan­tages:

• Econo­mical models
• Space-​saving feet (160 mm x 120 mm)
• Mecha­nical limit switch
• Complies with current regu­la­tions NF P90-​307

Aqua­deck provides optimum protec­tion against acci­dental falls into the water and is avai­lable in 3 models:

• Aqua­deck EC: a fast, auto­no­mous auto­matic cover with a solar-​powered battery
• Aqua­deck EC: a moto­rised auto­matic cover with a power supply unit located in the plant room. An ideal solu­tion for new pools
• Aqua­deck EM: a reliable, econo­mical cover with rigid slats that can be rolled up manually using a retrac­table handw­heel.

Specially designed for new pools or pool reno­va­tions.

BWT Cover­deck & Cover­deck AX-IN auto­matic covers are complete, high-​quality and inno­va­tive products that do not require a dry pit for the motor.

They are insta­lled under the coping, without any risk of dama­ging the pool’s sealing. The drive motor is easily acces­sible without having to be dismantled, and it can be disen­gaged depen­ding on the model for greater safety.

Protect your big, beau­tiful pool!

Star­deck is the bench­mark for profes­sio­nals buil­ding swim­ming pools.

It is designed to ensure both perfect aest­he­tics and impec­cable functio­na­lity, parti­cu­larly for very large pools.

Specially designed for new pools!

BWT Star­deck & Star­deck AX-IN auto­matic covers are comprehen­sive, inno­va­tive products. They are insta­lled in your pool, so they are perfectly concealed and fully inte­grated. Nothing protrudes from your pool, and the aest­he­tics of your pool area are care­fully preserved.

A must for new pools!

Specially designed for new pools or pool reno­va­tions.

BWT Cover­deck & Cover­deck AX-IN auto­matic covers are complete, high-​quality and inno­va­tive products that do not require a dry pit for the motor.

They are insta­lled under the coping, without any risk of dama­ging the pool’s sealing. The drive motor is easily acces­sible without having to be dismantled, and it can be disen­gaged depen­ding on the model for greater safety.

The perfect thermal cover!

The Aqua­roll and Omega rollers are ideal for exis­ting or new pools. They are fitted with a teles­copic shaft, machined in France, and grooved to accom­mo­date the bungee cords used to roll up the cover. Supplied with a wheel and synt­hetic resin, our models are designed to be insta­lled behind a 30 cm coping.

Tech­nical speci­fi­ca­tions:

• One fixed foot, one mobile foot fitted with two 170 mm diameter wheels
• Shaft locking device (Omega model)
• Shaft height 360 mm (Omega model) or 420 mm (Aqua­roll model), shaft diameter 95 mm
• Supplied with 13 bungee cords

Super-​500 covers are made of UV-​resistant polyethy­lene film with “GeoBubble” bubbles and are avai­lable in 2 finishes:

• Stan­dard finish for poly­gonal pools
• Rein­forced band finish for free-​form or round pools

Equip­ment:

• Reflec­tive tarpaulin, supplied with 3 bungee cords
• Eyelets for rollers and corner eyelets
• Patented leaf net, incor­po­rated into and welded to the cover

P-280 bubble covers are econo­mical, durable and robust.

Made from 280-​micron-thick UV-​resistant polyethy­lene honey­comb, they protect against rubbing against the sides of the pool, effortlessly withs­tand the tension of the reel’s bungee cords, and prevent the water from evapo­ra­ting - essen­tial for indoor pools and highly recom­mended for outdoor pools.

Tech­nical speci­fi­ca­tions:

• 280 µ polyethy­lene
• Edging along the lengths 
• Hemmed along the widths

The perfect thermal cover!

The Aqua­roll and Omega rollers are ideal for exis­ting or new pools. They are fitted with a teles­copic shaft, machined in France, and grooved to accom­mo­date the bungee cords used to roll up the cover. Supplied with a wheel and synt­hetic resin, our models are designed to be insta­lled behind a 30 cm coping.

Tech­nical speci­fi­ca­tions:

• One fixed foot, one mobile foot fitted with two 170 mm diameter wheels
• Shaft locking device (Omega model)
• Shaft height 360 mm (Omega model) or 420 mm (Aqua­roll model), shaft diameter 95 mm
• Supplied with 13 bungee cords

Cover your pool in complete safety!

CBE-​650 is made from a membrane of highly resis­tant polyester fabric (650 g/m²), with anti-​UV and anti-​fungal treat­ment. The conti­nuity of the fabric as it passes through the bars guaran­tees the increased mecha­nical strength of the cover.

Just one cover to install and you’ll have peace of mind for years to come. You avoid the tedious seasonal chan­geover of covers and the asso­ciated chores: clea­ning, folding and storing the removed cover, unfol­ding and insta­lling the other cover.

3 covers in 1!

Calypso is a PVC cover rein­forced with alumi­nium bars. It rolls and unrolls easily, provi­ding effec­tive protec­tion for your pool. It replaces the winter cover, the summer cover and its roller. And it makes your pool safe in compliance with current stan­dards.

Choose Calypso to save money, time and storage space.

Make your summer safe!

The P-580 bar cover is easy to use. With no compli­cated mecha­nism and no risk of break­down, it simply unwinds by pulling on a strap and rolls back up using a crank.

The bar cover is prac­tical and easy to main­tain. It is also tough and sturdy thanks to its polyester fabric membrane and natural anodised alumi­nium bars.

Protect your pool in summer and winter!

The Mambo cover is made from a membrane of highly resis­tant polyester fabric (650 g/m²) with UV protec­tion. The conti­nuity of the fabric as it passes through the bars guaran­tees increased mecha­nical strength of the cover. Mambo has eyelets along both lengths, in the same colour as the fabric, so that bungee cords can be fitted (optional) in very windy areas.

Cover your pool in complete safety!

CBE-​650 is made from a membrane of highly resis­tant polyester fabric (650 g/m²), with anti-​UV and anti-​fungal treat­ment. The conti­nuity of the fabric as it passes through the bars guaran­tees the increased mecha­nical strength of the cover.

Just one cover to install and you’ll have peace of mind for years to come. You avoid the tedious seasonal chan­geover of covers and the asso­ciated chores: clea­ning, folding and storing the removed cover, unfol­ding and insta­lling the other cover.

Aquatex is a light­weight, ultra-​resistant polyester mesh cover. It is woven, rein­forced and impreg­nated with PVC by coating.

• The surface in contact with the coping is effec­ti­vely protected by a large ultra-​resistant rein­for­ce­ment
• The under­side of the rein­for­ce­ment is sand-​coloured to avoid stai­ning the coping
• In its classic version, Aquatex is fitted with a faste­ning system using indi­vi­dual straps and dyna­mo­me­tric springs with bushing hooks

Colours: blue, almond green, grey.

Make your pool safe!

Eper­vier is an opaque cover made of pre-​stressed polyester fabric, rein­forced and impreg­nated with PVC by coating.

• The surface in contact with the coping is effec­ti­vely protected by a large, ultra-​resistant rein­for­ce­ment
• The under­side of the rein­for­ce­ment in contact with the ground is sand-​coloured so as not to risk stai­ning the coping
• The fabric has micro-​perforations all over to allow rain­water to run off without letting light through
• Eper­vier covers come with a protec­tive bag and a storage bag for the acces­so­ries

Colours: blue, almond green.

Winter­safe is an opaque cover made from 650g PVC-​coated polyester fabric. Colours: blue, almond green, sand, grey.

• The under­side of the cover in contact with the ground is always sand-​coloured to avoid the risk of stai­ning
• There are several types of perfo­ra­tion to drain off rain­water, and to adapt to pools with steps or free-​form shapes
• Winter­safe’s PVC coating is treated against ultra­violet rays and is also resis­tant to chlo­ri­nated products
• Winter­safe is fitted with an all-​round snap fastener and fixkit system

Aquatex is a light­weight, ultra-​resistant polyester mesh cover. It is woven, rein­forced and impreg­nated with PVC by coating.

• The surface in contact with the coping is effec­ti­vely protected by a large ultra-​resistant rein­for­ce­ment
• The under­side of the rein­for­ce­ment is sand-​coloured to avoid stai­ning the coping
• In its classic version, Aquatex is fitted with a faste­ning system using indi­vi­dual straps and dyna­mo­me­tric springs with bushing hooks

Colours: blue, almond green, grey.