We are international: Our store is now available throughout the EU. Have fun discovering our product selection!

Suitable replacement filter

Replacement filter for Quick & Clean - 3 pieces
Replacement filter cartridges to protect your shower and bath from limescale
€44.90
Limescale and soap residues cause unsightly deposits in showers, bathrooms and on shower walls. The BWT Quick & Clean anti-limescale filter system saves scrubbing and stripping of shower enclosures, fittings and tiles - tedious cleaning is done in a jiffy and without chemical cleaning agents! Depending on the degree of hardness - i.e. the amount of limescale in the water - cleaning has to be done less often or more frequently.

How it works - for you and your bathroom
  • Activate the Quick & Clean at the touch of a button at the end of your shower or bath.
  • Rinse off with soft water for noticeably softer skin and shiny hair.
  • Rinse off  glass, tiles, tub and fittings with soft water.
  • The result radiant shine for your bathroom - without wiping.
Product features
Product number: 812916P
Ambient temperature min./max.: 4 - 40 °C
Connection thread: 1/2"
Inlet water pressure: 2 bar
Water temperature, max.: 50 °C
Working pressure: 2 - 8 bar
The BWT Quick & Clean anti-limescale filter system is connected to the shower or bath tap. During the normal showering process, the water flows past the filter cartridge inside the filter housing. The final rinsing process is activated by pressing a button. After pressing the push-button, the water flows through the filter cartridge and is decalcified with the help of a so-called ion exchanger.
You can usually get replacement filter cartridges from the same place where you bought the BWT Quick & Clean anti-limescale filter system. On the Internet, the replacement filter cartridges can be purchased from the BWT online shop as well as from various online retailers. Contact us by e-mail [email protected]
If stored properly, original BWT filter cartridges can be stored for several years. Proper storage means:
  • At temperatures between 1 °C and 40 °C.
  • The filter cartridges should always be stored in the original packaging foil until the filter cartridge change.
The filter cartridges should be stored in a cool, dry place and protected from sunlight.
Don't worry, this phenomenon is completely harmless! It is a process-related formation of carbonic acid, which is noticeable as small bubbles or cloudiness and disappears after a short start-up phase.
The BWT Quick & Clean anti-limescale filter system can be installed on all exposed and concealed fittings. The only prerequisite: the fitting must have a (standardised) ½-inch threaded connection for the shower hose, which is the case with more than 95 percent of all fittings. Of course, there must be sufficient space for changing the filter cartridge.
Yes, the installation position has no influence on the function. However, we recommend installing the BWT Quick & Clean anti-limescale filter system vertically if possible.
Please ensure that there is approx. 25 cm of space under the filter housing, which is to be mounted vertically, for changing the filter cartridge. The total space requirement as well as the necessary wall clearance can be found in the operating instructions.
No. The BWT Quick & Clean anti-limescale filter system is intended exclusively for connection to a fitting in the shower or bathtub and is NOT suitable for producing drinking water. In other words: contaminated water can NOT be cleaned with the BWT Quick & Clean anti-limescale filter system.
You can drink the filtered water without hesitation, but please do not drink it in large quantities. The filter system is used exclusively to reduce the limescale content in the tap water and is designed and constructed only for its intended use. To get perfect water for making coffee or tea, we recommend that you treat your tap water with a BWT table water filter with the patented magnesium technology. In the process, the tap water is not only freed from limescale and taste-disturbing and undesirable substances such as chlorine, lead and copper, but is also enriched with the valuable mineral magnesium. This not only gives you naturally fresh-tasting drinking water, but also allows coffee and tea to develop their full aroma.
No, quite the opposite, many customers even use the water to wash their hair! The filtered water has - like the skin - a slightly acidic pH value and thus does not attack the acid mantle of the skin. Depending on the water hardness, the pH value varies between pH 5.0 and pH 6.0 at start-up, then increases with increasing operating time, and reaches the pH value of the supply water when the filter cartridge is completely exhausted. Note, however, that the capacity of the filter cartridge is exhausted much faster when the water is used for body cleansing and hair washing.
The capacity of the filter cartridge is up to 3 months, depending on water hardness and water consumption. The initial installation kit comes with a water hardness test strip that you can use to determine the expected duration of use. For showers with a standard size, we calculate a rinsing process of 10 seconds. To achieve optimum coverage, we recommend that if you shower several times a day in immediate succession, you only activate the BWT Quick & Clean anti-limescale filter system after the last shower.
No. Before using the BWT Quick & Clean anti-limescale filter system for the first time, please clean your shower or bathtub thoroughly to remove limescale and soap residues. Rinsing with the filtered (= soft) water subsequently effectively prevents limescale deposits on glass, tiles and fittings. The shower should continue to be cleaned at regular intervals.
The BWT Quick & Clean anti-scale filter system is suitable for almost all shower systems. GROHE and HANSA shower systems, among others, are suitable for optimum use.
You can water your plants with the BWT Quick & Clean anti-limescale filter system without worrying. Even better for your plants is the magnesium mineralised water from our BWT table water filters.
The installation of the BWT Quick & Clean anti-limescale filter system is extremely simple and can be carried out by yourself without any problems. All you need is a suitable (rolling) open-ended spanner. You will find the exact installation instructions under point 6. in the operating instructions.

Water softener

BWT Perla
Incl. AQA Guard floor sensor, AQA Stop, AQA Watch & AQA Safe valve
€4,499.00
BWT Perla Home
Self-check by means of Auto Check function
€3,732.00
BWT Perla Hybrid
100 % connectivity via GSM, WLAN, LAN and BWT Best Water Home App
€4,739.00
BWT Perla One
Simplex system for 24 hours pearl water
€2,975.00
BWT Perla Seta
Multi Info Touch Display
€4,739.00

Top-class products, great service

Professional services for you in our online shop

Kundenbetreuung von BWT

Do you have any questions regarding your order?

If you have any questions, suggestions or requests concerning the BWT online shop or your order, please do not hesitate to contact us.
Abo Service BWT

BWT subscription service

Thanks to BWT's convenient subscription service, your products are delivered directly to your home -  automatically and on time.

Smartphone-App Best Water Home von BWT

BWT Best Water Home App

All in one - app, water consultant and the place to find numerous benefits.