SAVE IN A SET IN BWT'S ADVENT WREATH: BWT Quick & Clean combined with top-quality care products

Other cartridges for filter taps

AQA drink M200
Water filter with 1,330 l filter capacity for cold application
€99.90
AQA drink M300
Water filter with 3,330 l filter capacity for cold application
€119.90
AQA drink M400
Water filter with 5,000 l filter capacity for cold application
€129.90
AQA drink MP200
Water filter with 600 l filter capacity for cold application plus limescale protection
€109.90
Top seller
Kartusche-MP400_EN_
AQA-drink_Detail_EN _1
AQA drink MP400
Water filter with 2,100 l filter capacity for cold application plus limescale protection
€139.90
BWT MyAQUA Soft
Water filter for drinking water optimisation
€49.90
The BWT filter cartridge AQA drink Magnesium Mineralized Water Protect reduces odour and taste-disturbing substances such as chlorine and heavy metals such as copper, lead and nickel. The filter reliably removes limescale and thus protects your appliances. The filtered water is enriched with the valuable mineral magnesium by the patented BWT Magnesium technology and thus the best sensory results are achieved for hot and cold drinks.
The filter can be connected directly to the cold water line using an AQA drink 3-way fitting.

Please note that our filter cartridges are exclusively intended for BWT AQA drink systems (e.g. AQA drink Pure LOFT or AQA drink Pure URBAN).
Product features
Product number: 812657
Chlorine reduction: Yes
Diameter: 110 mm
Filter capacity at 12° dH: 1,400 l for hot and cold application
Height (with filter head): 445 mm
Limescale protection: Yes
Magnesium release: ≤ 35 mg/l
Mineralised with magnesium for perfect taste: Yes
Ultrafiltration: -
The filter performance depends on the water quality and hardness of your tap water and also on the size of the AQA drink filter cartridge used.
The performance can be found in the installation and operating instructions enclosed in the packaging or in the data sheet for the filter. (Link to data sheet)
An Aquastop is integrated into the BWT filter head, which prevents water from escaping unintentionally when the shut-off valve is open if no AQA drink filter cartridge is installed.
However, it is advisable to turn off the water supply when replacing the filter and relieve the pressure by briefly opening the tap or pressing the cold water button on the water dispenser.
To achieve the optimum filter effect, you should replace the AQA drink filter cartridge as follows:
  • Filter Magnesium Mineralized Water: after exhaustion of capacity or after 12 months at the latest
  • Filter Magnesium Mineralized Water Protect Care: after exhaustion of capacity or after 6 months at the latest
  • Filter Filtered Water Care: after exhaustion of capacity or after 6 months at the latest
  • Filter Simply Care: after exhaustion of capacity or after 6 months at the latest
The service life depends on the quality and hardness of your tap water.
Yes, our AQA drink filter cartridges are made of plastics that do not contain BPA. Polypropylene (PP) and polystyrene (PS) are used for the production of the AQA drink filter cartridges.
Always observe local regulations for disposal!
  • AQA drink filter cartridges: Dispose of exhausted filter cartridges in the household waste.
  • Packaging material: Foil and cardboard - if locally possible - should be sent for waste separation.
  • You are thus helping to protect the environment.
As a quality manufacturer, all our AQA drink filter cartridges are produced in Austria. There, we have a state-of-the-art production facility that is subject to continuous quality controls.
  • Each BWT AQA drink filter cartridge may only be operated with water that meets the legal requirements for drinking water quality.
  • The water filter is not suitable for the production of drinking water, i.e. the filter is not suitable for the treatment of hygienically questionable water.
  • If you are required by official authorities to boil tap water as a result of germs, this also applies to BWT filtered water. If the tap water is again approved by the authorities as safe for consumption, the AQA drink filter cartridge must be replaced in any case and the connections cleaned.
  • For certain groups of people, such as people with impaired immune defences and for the preparation of baby food, the BWT filtered water must be boiled.
  • The AQA drink filter cartridge must be replaced after 6-12 months at the latest, depending on the filter type, after the first use.
  • If there is an interruption in use of more than 2 days, the filter system must be rinsed with 4-5 litres of water before it is used again. In case of an interruption in use of more than 4 weeks, we recommend replacing the AQA drink filter cartridge
.
Our production facility in Austria is aligned according to the strict ISO guidelines and the hygiene regulations of the HACCP concept and has been inspected several times by independent auditors. In order to meet the highest hygiene requirements, our AQA drink filter cartridges are sterilised in the process and have a low silver content (in accordance with the recommendations of the World Health Organisation WHO). In this way, we create a consistently high level of quality. This is the only way to ensure that the handling of the sensitive product drinking water always meets the highest hygiene standards.
The capacities can be read in the installation and operating instructions for the filter. These are enclosed in the AQA drink filter cartridge packaging.
In addition, you can also find an overview on the data sheet for the AQA drink filter cartridge, which is available for download on our homepage.
Our AQA drink cartridges are exclusively suitable for BWT AQA drink systems (e.g. AQA drink Pure URBAN or AQA drink Pure LOFT).

Not compatible with BWT Bestmax or third-party systems such as Grohe.

Which cartridge is the right one for me?

Filter capacity at 12° dH
Limescale protection
Mineralised with magnesium for perfect taste
Zinc release
Height (with filter head)
Kartusche-MP200_EN_
AQA drink MP200
€109.90
Filter capacity at 12° dH
600 l for hot and cold application
Limescale protection
Yes
Mineralised with magnesium for perfect taste
Yes
Zinc release
-
Height (with filter head)
385 mm
Filter capacity at 12° dH
600 l for hot and cold application
Limescale protection
Yes
Mineralised with magnesium for perfect taste
Yes
Zinc release
≤ 3 mg/l
Height (with filter head)
385 mm
Kartusche-M200_EN_
AQA drink M200
€99.90
Filter capacity at 12° dH
1,330 l with cold application
Limescale protection
No
Mineralised with magnesium for perfect taste
Yes
Zinc release
-
Height (with filter head)
385 mm

Top-class products, great service

Professional services for you in our online shop

Kundenbetreuung von BWT

Do you have any questions regarding your order?

If you have any questions, suggestions or requests concerning the BWT online shop or your order, please do not hesitate to contact us.
Abo Service BWT

BWT subscription service

Thanks to BWT's convenient subscription service, your products are delivered directly to your home -  automatically and on time.

Smartphone-App Best Water Home von BWT

BWT Best Water Home App

All in one - app, water consultant and the place to find numerous benefits.