BWT Chlorine tablets (200 gr) organic 1 kg
Long-term tablets for continuous chlorination
This article is currently only available on request.
- 200 gr chlorine tablets slow dissolving
- On an organic basis
- Active chlorine content 90 %
- Does not affect the pH value
- Suitable especially for use in hard pool water
- Suitable for larger swimming pools
Pool water care
High-quality, slowly dissolving 200 g chlorine tablets, on an organic basis with an active chlorine content of 90%. The product does not affect the pH value of the water and is also suitable for use in hard water. The 200 g chlorine tablets are ideal for long-term chlorination. 1 tablet is sufficient to keep the chlorine content of approx. 30 m³ of pool water at approx. 0.5 mg/l. Always follow all label instructions. Water care products must be securely closed and kept away from children.
Hazard warnings
Use biocidal products carefully.
Always read the label and product information before use.
Always read the label and product information before use.
Attention! Observe danger and warning notes! Keep out of reach of children!
H302 Harmful if swallowed
H319 Causes severe eye irritation
H335 May irritate the respiratory tract
H410 Very toxic to aquatic organisms with long lasting effects
EUH031 In contact with acid, emits toxic gases
According to EC directives GefStoffV
H319 Causes severe eye irritation
H335 May irritate the respiratory tract
H410 Very toxic to aquatic organisms with long lasting effects
EUH031 In contact with acid, emits toxic gases
According to EC directives GefStoffV


Product features
Product number:
014166
Active chlorine content: | 96 % |
---|---|
Algal prevention (starch): | No |
Chlorine stabilisation: | Yes |
Container size: | 1 kg |
Depot effect: | 7 days |
Dosage: | 1 tablet per 30 m³ |
Filtermaterial: | All |
Flocculation (strength): | No |
Poolsize in m³: | 20 - 60 |
Pool type: | Above ground pool large, Pool |
Pool water condition: | Pool algae |
Skimmer: | Yes |
Solubility: | Slow |
Tablet size: | 200 g tablet |
Treatment method: | Permanent disinfection |
pH-Neutral: | Yes |
For sure, the pH value is far outside the ideal range. The problem is solved with the appropriate pH correction.
No, each product is mixed separately and must also be added to the pool water separately.
The best way to measure the chlorine content is with the BWT AQA marin Pooltester 5 in 1 according to instructions
No. The addition to the pool should be done via the AQA marin dosing float, regardless of the pool size, while the pool water is circulating and bathing is not in progress. In addition, the products should be kept away from children (also when using the filled dosing float).
No. For shock chlorination, the AQA marin S-Chlor tablets are perfect, due to their active chlorine content of 56% percent and the quick release into the pool water.