BWT pH-Minus Acid Granulate 1.5kg
For pH correction of the swimming pool water
This article is currently only available on request.
- Granular acid for lowering the pH value of pool water
- Quickly soluble
- Free of hydrochloric acid
- Perfect pool water due to perfect water care
- Addition necessary from a pH above 7.4
- Quick solubility due to granular form
Pool water care
The ideal pH value is 7.2-7.4. pH-Minus lowers the pH value of the pool water. To lower the pH value by 0.1, 100 grams are needed per 10 m³ of pool water. The product is quickly soluble and free of hydrochloric acid. Pre-dissolve pH-Minus in a clean plastic container and add to the pool water. Always follow all label instructions. Always close water care products securely and keep away from children.
Product features
Product number:
016633
Container size: | 1,5 kg |
---|---|
Filtermaterial: | All |
Poolsize in m³: | 0 - 15 |
Pool type: | Above ground pool, Above ground pool large, Pistoche, Pool, Whirlpool |
Pool water condition: | Cloudy water |
Skimmer: | No |
Treatment method: | pH-Management |
Sicherheitshinweise
Biozidprodukte vorsichtig verwenden.
Vor Gebrauch stets Etikett und Produktinformationen lesen.
Vor Gebrauch stets Etikett und Produktinformationen lesen.
Achtung! Gefahren- und Warnhinweise beachten! Außerhalb der Reichweite von Kindern aufbewahren!
H318 Verursacht schwere Augenschäden
Nach EG-Richtlinien GefStoffV
Nach EG-Richtlinien GefStoffV

The pH value characterises the acidic or alkaline state of the water.
With either our digital BWT Pooltester 5in1 or the BWT ICO Station as a smart pool tester that sends you all the important water values, including dosing recommendations for pool chemicals, to your smartphone.
First, you should add BWT Water Care pH-Plus while the circulation is switched on (approximately the volume corresponding to the added pH-Minus) and check the pH value with our digital pool tester 5in1 or the BWT ICO Station as a smart pool tester until it is in the optimum range of 7.0 to 7.4.
As soon as the pH value moves upwards, the addition should be stopped and measured cyclically. Continuous circulation is very important to ensure even mixing of the pool water.
No. In general, the addition of BWT pool water care products should take place under circulation, offset in time and without bathing, so that each product can develop its best effect undisturbed.