BWT FSA1800 - Classy cleanliness
With the BWT FSA1800 pool robot, you enter a new world where efficiency meets style and elegance, where size is replaced by finesse and intelligence. Light, strong, intuitive - that describes the models perfectly.

Efficiency meets elegance
Despite its compact size, the modern design allows for faster and more efficient cleaning with low energy consumption. The FSA1800 allows easy operation at the touch of a button. Thanks to its two-stage planetary gear in combination with two traction motors, even dirt in hard-to-reach places is no problem. The ergonomic and intuitive design also makes the pool robot a real eye-catcher in the pool!

Particularly light
Your back will thank you - the FSA1800 is only half the weight of conventional pool robots and is therefore particularly user-friendly. The quick-drain system makes it easy to carry and remove from the pool.

Connected at all times
The FSA1800 has a Bluetooth module. With the BWT RC app, which can be downloaded free of charge from the Apple Store or Play Store, you have control of the robot at your fingertips! You can start and stop your robot remotely, and navigate freely to guide your pool cleaner to trouble spots.

Stable on any surface
With its on-board technology, no obstacle is too difficult for the FSA1800. Even in steep places, it navigates with ease and adapts to the surface to be cleaned. The optimised navigation in lanes, guarantees a complete cleaning, regardless of the shape of the pool. This makes the FSA1800 one of the strongest pool robots on the market.

Product features
Product number: RERN-NOYR-18F1E
App control: Yes
Brush type: PVC brush
Cable length: 16 m
Consumption: 150 Watt
Dimensions (w x h x d): 375 x 200 x 365
Drive technology: Planetary gear technology
Duration of the cleaning: 1.5 h, 2 h or 2.5 h + remote control via smartphone app
Filter type: Single layer filter, 150 mesh
For pools up to: 12 metres length
Manufacturer's warranty: 24 months
Motor: 2 drive motors
Navigation system: Smart Navigation + Gyroscope
Power supply: 29 Volt, Mars + APP
Suction power: 15 m³/h | < 37.500 litres at 2,5 h runtime
Type of cleaning: Floor, wall, waterline
Weight: 5,75 kg
Yes, the BWT pool robot can be operated up to a salt content of 4000 ppm.
Note: The robot should be rinsed thoroughly with fresh water after each operation.
No! Do not use the robot while people are in the pool.
With the free [email protected] app, you can control your BWT pool robot manually and change all parameters, such as the cleaning time or the type of cleaning. Another practical feature is the delayed start-up of the robot - this allows any dirt that is stirred up to settle before the robot starts cleaning.
Simply place it in the water and let it float. The brushes automatically fill up with water. Then it sinks again as usual. You can speed this up by kneading the brushes under water.
The BWT pool robot is suitable for a water depth of up to 4 m.
The BWT pool robots FSA1500 & FSA1800 clean the bottom, walls and waterline of the pool.
No. The BWT pool robot has the unique 4D filter system, which absorbs and filters the usual dirt in a pool in the best possible way.
Basically, it is sufficient to clean and check your BWT pool robot regularly during daily use. 

  • Be sure to disconnect the device from the power supply during cleaning
  • Clean the filters thoroughly after each use.
  • Check the drive system and the suction motor regularly and, if necessary, free them from impurities/foreign bodies
  • Unplug the floating cable at the transformer and lay it together starting from the robot. Occasionally, lay the cable out in the sun and leave it for a few hours before reassembling it
  • Costable DHL pick-up service: The packed robot will be collected from your home. You can specify the desired date in the form. You will receive the shipping label and tracking number by e-mail after a successful repair request via the form. Information on delivery and shipping costs can be found here.
  • Self-delivery at your own expense: After a successful repair request, you will receive a shipping label by e-mail and send your robot to a DHL service partner of your choice. You can find DHL branches near you here.
Return address:
BWT Austria GmbH
Pool Robot Service
Walter-Simmer-Strasse 4
A-5310 Mondsee
for questions please contact [email protected] 
If your pool robot does not vacuum the dirt properly, please carry out the following steps:
  • Check the filters and clean them if necessary.
  • Check the impeller for its completeness, as well as for foreign objects and remove them if necessary.
As a general rule, the following applies to manufacturer's warranty claims for BWT pool robots:
  • A manufacturer warranty claim must always be accompanied by a copy of the original invoice as proof of warranty.
  • For unauthorised returns, processing and shipping costs will be invoiced
  • Mere goods returns from the online shop (without technical or optical defects) are to be processed via the returns form, which you will receive upon delivery, or the withdrawal form
All pool robot models that can be returned can be found directly in the form for selection.

Top-class products, great service

Professional services for you in our online shop


The perfect gift for any occasion.

Order BWT gift vouchers fast and comfortably online now!
Kundenbetreuung von BWT

Do you have any questions regarding your order?

If you have any questions, suggestions or requests concerning the BWT online shop or your order, please do not hesitate to contact us.
Abo Service BWT

BWT subscription service

Thanks to BWT's convenient subscription service, your products are delivered directly to your home - automatically and on time.
Smartphone-App Best Water Home von BWT

BWT Best Water Home App

All in one - app, water consultant and the place to find numerous benefits.