BWT Combi - Care Cartridge

Product details

Replace­ment cartridge for both 15mm and 22mm Combi-​Care dosing system. Food grade polyphos­phate needs to be replaced every 12 months. Recy­clable can, where facil­i­ties exist. WRAS approved product.

More infor­ma­tion

Care should be taken when replacing the cartridge. The water supply must be switched off and any residual pres­sure relieved before starting work. Once the new cartridge is fitted the date ring should be reset and the instal­la­tion checked for leaks. Max working temper­a­ture 30 c. Please note: These units will be affected by hot water transfer back down the system, there­fore they must be installed as far away from the boiler as possible (minimum 1m). Do not install where ambient temper­a­ture is likely to exceed 35c. Notes: Please do not over tighten fitting or use a pipe wrench on body of the canister. Unit must continue to be adequately supported on both sides of the instal­la­tion and correctly aligned to avoid stress to the unit or joint. Protect form freezing.

Easy installation - Compression fittings supplied
Can be installed using traditional tools; pipe cutter and two suitable wrenches, on to horizontal or vertical pipework

Food Grade - Polyphosphate
Drinking water remains safe to drink even after treatment

Protects central heating boilers
WRAS Approved the BWT Combi Care is ideal for protecting the secondary heating circuit in boilers in accordance with Part L

12 Month cartridge life
Built in cartridge life indicator is the prefect reminder for the cartridge to be changed as part of the boilers annual service

Contents:

• 1 x 12 month polyphosphate cartridge

BWT Quality