BWT D1 hygiene set
- Suitable for BWT D1 pressure reducer 40.16 ½ "- ¾"
- Hygiene set for annual maintenance, consisting of a stainless steel sieve insert 160 μm and a plastic filter bowl
- Protection against dirt particles for trouble-free operation of the D1 pressure reducer
- Clean and ready to go in next to no time by simply changing the D1 filter screen
- Simple to monitor through the transparent filter bowl
- Reminder service in the BWT App
Product Details
Technical Details
FAQ
Easy Change Service Kit
Maintain the effectiveness, safety and appearance of your D1 filter
- App based annual reminder
- Includes: Stainless steel sieve (160 microns) and high quality transparent bowl
- Easily changed by trained operator without dismantling the spring hood
Technical details
Product features
| Filter screen material | stainless steel |
|---|---|
| Suitable for Models | ½ "- ¾" (D1 Eco / Red / Inox 40.16) |
| Mesh size filter screen | 160 μm |
| Temperature range | Water up to 40 ° C |
| Pre/post pressure adjustable | 16 bar / 1.5 - 7 bar |
| Filter bowl material | plastic |
How often should the sieve insert in the D1 pressure reducer be cleaned or replaced?
ÖNORM EN 806-5 recommends that a pressure reducer be inspected or serviced annually.
For which devices is the BWT D1 hygiene set suitable?
The BWT D1 hygiene set ½ "- ¾" for:
- BWT D1 Eco 40.16 in sizes ½ "to ¾"
- BWT D1 Red 40.16 in sizes ½ "to ¾"
- BWT D1 Inox 40.16 in sizes ½ "To ¾"
The BWT D1 Hygiene Set 1 "- 1 ¼" for:
- BWT D1 Eco 40.16 in sizes 1 "to 1 ¼"
- BWT D1 Red 40.16 in sizes 1 "to 1 ¼"
- BWT D1 Inox 40.16 in sizes 1 "to 1 ¼"
Which problems can arise from particle entry or corrosion in water pipes?
- Burst or leaking water pipes
- Corrosion particles destroy seals, fittings leak
- Corrosion particles clog screens and solenoid valves of washing and dish washers
- Reduction in the quality of drinking water
- Microbiological degradation of drinking water systems (corrosion byproducts can create breeding grounds for bacteria such as Legionella)
- Discoloration on sanitary
Product Details
Easy Change Service Kit
Maintain the effectiveness, safety and appearance of your D1 filter
- App based annual reminder
- Includes: Stainless steel sieve (160 microns) and high quality transparent bowl
- Easily changed by trained operator without dismantling the spring hood
Technical Details
Technical details
Product features
| Filter screen material | stainless steel |
|---|---|
| Suitable for Models | ½ "- ¾" (D1 Eco / Red / Inox 40.16) |
| Mesh size filter screen | 160 μm |
| Temperature range | Water up to 40 ° C |
| Pre/post pressure adjustable | 16 bar / 1.5 - 7 bar |
| Filter bowl material | plastic |
FAQ
How often should the sieve insert in the D1 pressure reducer be cleaned or replaced?
ÖNORM EN 806-5 recommends that a pressure reducer be inspected or serviced annually.
For which devices is the BWT D1 hygiene set suitable?
The BWT D1 hygiene set ½ "- ¾" for:
- BWT D1 Eco 40.16 in sizes ½ "to ¾"
- BWT D1 Red 40.16 in sizes ½ "to ¾"
- BWT D1 Inox 40.16 in sizes ½ "To ¾"
The BWT D1 Hygiene Set 1 "- 1 ¼" for:
- BWT D1 Eco 40.16 in sizes 1 "to 1 ¼"
- BWT D1 Red 40.16 in sizes 1 "to 1 ¼"
- BWT D1 Inox 40.16 in sizes 1 "to 1 ¼"
Which problems can arise from particle entry or corrosion in water pipes?
- Burst or leaking water pipes
- Corrosion particles destroy seals, fittings leak
- Corrosion particles clog screens and solenoid valves of washing and dish washers
- Reduction in the quality of drinking water
- Microbiological degradation of drinking water systems (corrosion byproducts can create breeding grounds for bacteria such as Legionella)
- Discoloration on sanitary
BWT D1 hygiene set
BWT D1 hygiene set 1/2" - 3/4"
Select product variant